|Place of Origin:||CHINA|
|Minimum Order Quantity:||1 SET|
|Delivery Time:||45 DAYS|
|Payment Terms:||Usually it is 30% by T/T as downpayment, balance by T/T before delivery or L/C at sight.|
|Supply Ability:||30 SETS/MONTH|
|Service::||Accept inspection before shipment and the acceptance criteria of customers' trial sample.|
|Type:||Mixing, Milling;||Material Apply:||Silicones,Rubber, Plastic, Compound Materials ;|
|Application:||Rubber And Plastic Processing Machine;|
Rubber Kneader/Rubber machine/Dispersion machine;Banbury Internal Kneader;Pressure Enclosed Mixing Mill;
Why Choose us :
Thanks to the deep and close relationships to our customers of hundreds of rubber manufactures, who are constantly exploring technology for gains in productivity;
We target to provide our customers one-stop solutions no matter of small,modest or large scales of production;
Due to the rich experience manufacturing and chinese complete product chain, our Rubber kneader/rubber machine/dispersion machine; Banbury internal kneader ;X(S)M- Series;
This machine is suitable for the plastication of rubber and plastics and the mixing of various plastic materials and plastics.
It is especially suitable for middle and small sized rubber and plastic products factories and food and dyestuff industries with changeable varieties and colors.
E.V.A. foam sole, rubber sole, TPR, sole, rubber roller, rubber sponge, tire, sports ball, rubber band, rubber tube, rubber belt, bottle stopper, oil seal, shock-proof rubber, adhesive tape, elastic tape, color master, ink, electrical rubber parts, all kinds of automobile rubber products and all kinds of mixed raw materials of chemical industry.
***Tell us your production purpose to select the most suitable model.
Advantages of INTER-CHINA OPNE ROLL MILL/Open type Rubber Mixing Mill
1. Good materials
Cold cast iron is generally used as the material of roller.The surface texture of this material is hard, resistant to wear and corrosion;The internal toughness is good, the strength is big; Easy heat conduction, easy processing, low cost.
Chilled cast iron rollers are divided into ordinary chilled cast iron (ltg-p) and alloy chilled cast iron (ltg-h).
Inter-China XSK Model all use allyoed chilled cast iron, thus has better surface hardness and working strength, so its service life is prolonged.
2. Safety device
When the internal mixer is working, the two rotors rotate relative to each other, and the material from the feeding port is clamped into the roll gap and squeezed and sheared by the rotor. After passing through the roll gap, the lower top edge is divided into two parts, respectively The gap between the front and rear chamber walls and the rotor is returned to the top of the nip. During the week of the flow around the rotor, the material is sheared and rubbed everywhere, causing the temperature of the rubber to rise sharply and the viscosity to decrease, increasing the wettability of the rubber on the surface of the compounding agent, so that the rubber is in full contact with the surface of the compounding agent. The compounding agent agglomerates through the gap between the rotor and the rotor, the gap between the rotor and the upper and lower top cymbals, and the inner wall of the inner chamber with the rubber compound, is sheared and broken, and is surrounded by the rubber which is stretched and deformed, and is stabilized in a broken state. At the same time, the ribs on the rotor move the rubber along the axial direction of the rotor to agitate and mix, so that the compounding agent is uniformly mixed in the rubber compound. The compounding agent is repeatedly sheared and crushed, the rubber compound is repeatedly deformed and restored, and the rotor ribs are continuously stirred, so that the compounding agent is uniformly dispersed in the rubber compound and reaches a certain degree of dispersion. Since the shearing action of the rubber compound during the mixing of the internal mixer is much larger than that of the open mill, the high temperature of the rubber mixing makes the mixing efficiency of the mixer very much higher than that of the open mill.
What' the difference bewteen Internal Mixer and Open Mixer ?
At present, the use of Open Roll Mill is still very wide, now in many ways can be replaced by internal mixing machine, but Open Roll Mill still has practical significance.
1. It is necessary practical equipment in medium and small factories.Because the investment of internal mixing machine is large, and the application of mixer is not as wide as that of Open Roll Mill .
2. Some mixing rubber with high heat sensitivity can avoid early vulcanization and facilitate heat dissipation, so it must be mixed with an open mixer.
3. Some manufacturers mix different colors of rubber, Open Roll Mill is easy for cleaning of machine.
4. Special rubber, such as nitrile reinforced rubber.
Technical Parameters :
|Total volume of mixing chamber(L)||6||10||45||75||125||180||250||330|
|Working volume of mixing chamber(L)||2||5||20||35||55||75||110||150|
|Driving motor power(KW)||7.5||11||30||55||75||110||185||220|
|Tilting motor power(KW)||0.5||0.75||1.5||2.2||3||4||5.5||11|
|Rotating speed of the rotor (front /rear)(rpm)||40/35||40/33||32/23.5||30/24.5||30/24.5||30/24.5||30/24.5||30/24.5|
|Pressure of compressed air(Mpa)||0.1~0.2||0.2~0.3||0.5~0.7||0.5~0.7||0.6~0.7||0.6~0.7||0.6~0.7||0.6~0.8|
|Capacity of compressed air(m3/min)||≥0.5||≥0.6||≥0.7||≥0.9||≥1.0||≥1.0||≥1.2||≥1.5|
|Pressure of cooling water (rubber mixing)(Mpa)||0.1~0.2||0.1~0.2||0.1~0.2||0.1~0.3||0.3~0.4||0.3~0.4||0.3~0.4||0.2~0.4|
|Pressure of heating steam (plastics mixing)(Mpa)||0.5~0.8||0.5~0.8||0.5~0.8||0.5~0.8||0.5~0.8||0.5~0.8||0.5~0.8||0.4~0.8|
For more details, please contact us freely !!!
INTER-CHINA RUBBER MACHINERY CO., LTD.
Email : email@example.com
Open Roll Mill, Open type Rubber Mixing Mill
Rubber kneader/rubber machine/dispersion machine